Gutter Replacement Cost
Most homeowners pay about $1,200 to $4,000 to replace gutters on an average house, or roughly $5 to $15 per linear foot for aluminum seamless gutters installed. Copper and steel cost much more. Repairing a leaking seam or a sagging section usually costs $150 to $600.
Typical pro cost
$1,200 to $4,000
- Urgency
- Plan ahead
- DIY difficulty
- Moderate
- Time to fix
- 1 day (pro)
- Prices
- US typical range
Last reviewed September 2026
Signs it's this problem
- Gutters sag or pull away from the fascia
- Leaking seams and joints
- Rust, cracks or holes
- Water overflowing even after cleaning
- Rotting fascia boards behind the gutters
Common causes
Age
Vinyl and aluminum gutters typically last about 20 years; steel less if not maintained.
Clogs and ice
Heavy debris and ice load bend gutters and loosen hangers.
Poor pitch
Gutters that do not slope toward downspouts hold water and leak.
Undersized gutters
Five-inch gutters can overflow on large or steep roofs.
How to fix it, step by step
- 1
Measure the total length of your roof edges where gutters run.
- 2
Check hangers, seams and downspouts. Tighten loose hangers and reseal small leaking seams.
- 3
Decide on material: aluminum seamless is the common choice for price and durability.
- 4
Consider 6-inch gutters and larger downspouts for big or steep roofs.
- 5
Get 2 to 3 written quotes that include removal, downspouts, hangers and fascia repair.
- 6
Add downspout extensions so water discharges at least 4 to 6 feet from the foundation.
Tools and materials
- Ladder with stabilizer
- Gutter sealant
- Hanger screws
- Tape measure
Approximate DIY cost: $50–$300 for repairs
Call a pro when
- Two-story or steep homes
- Seamless gutters (made on site)
- Rotted fascia needs replacing
Gutter Replacement Cost cost
| Job | Typical cost |
|---|---|
| Aluminum seamless gutters, per linear foot | $5–$15 |
| Vinyl gutters, per linear foot | $4–$8 |
| Copper gutters, per linear foot | $25–$40 |
| Gutter repair (seams, sagging section) | $150–$600 |
| Gutter guards, per linear foot | $7–$30 |
Ranges are typical US prices compiled by FixHomeCost. Prices vary by region, home and contractor, so compare 2–3 local quotes.
Common questions
How long do gutters last?
Aluminum and vinyl gutters usually last about 20 years, galvanized steel around 20, and copper 50 years or more.
Are seamless gutters worth it?
Usually yes. Fewer seams mean fewer leaks, and aluminum seamless gutters cost only a little more than sectional ones.
Should I replace gutters with a new roof?
It often makes sense if the gutters are older, because the drip edge and fascia are exposed during the roof job anyway.
Do gutter guards really work?
Quality guards reduce cleaning a lot, but none are maintenance-free. Expect to rinse or brush them off occasionally.
Related guides
This is general information, not a professional inspection. See how we research costs.